The EMD FP7 is a 1,500 horsepower (1,100 kW), B-B dual-service passenger and freight-hauling diesel locomotive produced between June 1949 and December 1953 by General Motors' Electro-Motive Division and General Motors Diesel. Final assembly was at GM-EMD's La Grange, Illinois plant, excepting locomotives destined for Canada, in which case final assembly was at GMD's plant in London, Ontario. The FP7 was essentially EMD's F7A locomotive extended by four feet to give greater water capacity for the steam generator for heating passenger trains.
While EMD's E-units were successful passenger engines, their A1A-A1A wheel arrangement made them less useful in mountainous terrain.[citation needed] Several railroads had tried EMD's F3 in passenger service, but there was insufficient water capacity in an A-unit fitted with dynamic brakes. The Atchison, Topeka and Santa Fe Railway's solution was to replace the steam generators in A-units with a water tank, and so only fitted steam generators into the B-units. The Northern Pacific Railway's solution was to fit extra water tanks into the first baggage car, and to pipe the water to the engines. EMD's solution to the problem was to add the stretched FP7 to its catalog increasing the water storage capacity.
A total of 381 cab-equipped lead A units were built; unlike the freight series, no cabless booster B units were sold. Regular F7B units were sometimes used with FP7 A units, since they, lacking cabs, had more room for water and steam generators. The FP7 and its successor, the FP9, were offshoots of GM-EMD's highly successful F-unit series of cab unit freight diesel locomotives.
F3s, F7s, and F9s equipped for passenger service are not FP-series locomotives, which, although similar in appearance, have distinctive differences. This includes, but not limited to, the greater body length. The extra 4 ft (1.2 m) of length was added behind the first body-side porthole, and can be recognised by the greater distance between that porthole and the first small carbody filter grille. The corresponding space beneath the body, behind the front truck, was also opened up; this either remained an empty space or was filled with a distinctive water tank shaped like a barrel mounted transversely.[1]
Over their production run, there were numerous detail changes including the style of side grills (notably on Canadian-built units), carbody louvres, and dynamic brake fan sizing (36 in [0.91 m] initially, 48 in [1.2 m] on later production units). Some railroads such as Southern Pacific and Canadian Pacific outfitted their units with rooftop-mounted icicle breakers for protecting dome car windows in mountain territory where icicles formed around the roofs of tunnels.
Canadian Pacific Railway 4099 was later renumbered 1400. After a stint with Via Rail and Nebkota, it was reacquired by CP and given the number 1400 again. It was retired again in 2007 and is preserved on static display at the company's Ogden headquarters, as CP 1400.
Milwaukee Road 101A, on static display (was non-operational when acquired but reportedly restored by volunteers to operable condition[3]) in Cresco, Iowa.
Marre, Louis A. (1995). Diesel Locomotives: The First 50 Years: A Guide to Diesels Built Before 1972. Railroad Reference Series. Waukesha, Wisconsin: Kalmbach Publishing. ISBN978-0-89024-258-2.
Solomon, Brian (2010). Vintage Diesel Power. Minneapolis, Minnesota: MBI Publishing. ISBN978-0-7603-3795-0.
Solomon, Brian (2011). Electro-Motive E-Units and F-Units: The Illustrated History of North America's Favorite Locomotives. Minneapolis, Minnesota: Voyageur Press. ISBN978-0-7603-4007-3.
Solomon, Brian (2012). North American Locomotives: A Railroad-by-Railroad Photohistory. Minneapolis, Minnesota: Voyageur Press. ISBN978-0-7603-4370-8.