Rib (aeronautics)

In an aircraft, ribs are forming elements of the airframe structure of a wing, especially in traditional construction.

By analogy with the anatomical definition of "rib", the ribs attach to the main spar, and by being repeated at frequent intervals, form a skeletal shape for the wing. Usually ribs incorporate the airfoil shape of the wing, and the skin adopts this shape when stretched over the ribs.

Type of ribs

There are several types of ribs. Form-ribs, plate-type ribs, truss ribs, closed-ribs, forged ribs and milled ribs, where form-ribs are used for light to medium loading and milled ribs offer the greatest strength.

Form-ribs are made from a sheet of metal bent into shape, such as a U-profile. This profile is placed on the skin, just like a stringer, but then in the other direction.
Plate-type ribs consist of sheet-metal, which has upturned edges and (often has) weight-saving holes cut into it.
Truss ribs are built up out of profiles that are joined together. These joints require great attention during design and manufacture. The ribs may be light or heavy in design which make them suitable for a wide range of loads.
Closed-ribs are constructed from profiles and sheet metal and are suitable for closing off sections of the wing (e.g.: the fuel tank). Here too, particular care must be taken with the joints and this type of rib is also suitable for application in a variety of loading conditions.
Forged ribs are manufactured using heavy press-machinery. The result is fairly rough; for more refined parts, high-pressure presses are required, which are very expensive. Forged pieces (usually) have to undergo further treatment (for smoother edges and holes). Forged ribs are used for sections where very high loads apply - near the undercarriage for example.
Milled ribs are solid structures. They are manufactured by milling away excess material from a solid block of metal (usually using computer-controlled milling machines). The shape of these ribs is always accurately defined. Such ribs are used under similar conditions as those for forged ribs.

Ribs are made out of wood, metal, plastic, composites, foam. The wings of kites,^[1] hang gliders,^[2] paragliders,^[3] powered kites,^[4] powered hang gliders, ultralights, windmills ^[5] are aircraft that have versions that use ribs to form the wing shape.

For full size and flying model aircraft wing structures that are usually made of wood, ribs can either be in one piece (forming the airfoil at that rib's "station" in the wing), or be in a three-piece format, with the rib web being the part that the one-piece rib consisted of, with capstrips for the upper and lower edging of the rib, running from the leading edge to the trailing edge, being the other two component parts.

References

^ Ribs in kite
^ Swift Development
^ Parafoil ribs Archived 2006-10-16 at archive.today
^ Powered Paraglider glossary. Ribs. Archived 2008-05-09 at the Wayback Machine
^ Windmill with ribs in its wings

[1] Ribs in kite

[2] Swift Development

[3] Parafoil ribs Archived 2006-10-16 at archive.today

[4] Powered Paraglider glossary. Ribs. Archived 2008-05-09 at the Wayback Machine

[5] Windmill with ribs in its wings

[1]

[2]

[3]

[4]

[5]

v t e Aircraft components and systems
Airframe structure	Aft pressure bulkhead Cabane strut Canopy Crack arrestor Cruciform tail Dope Empennage Fabric covering Fairing Flying wires Former Fuselage Hardpoint Interplane strut Jury strut Leading edge Lift strut Longeron Nacelle Rib Spar Stabilizer Stressed skin Strut T-tail Tailplane Trailing edge Triple tail Twin tail V-tail Vertical stabilizer Wing root Wing tip Wingbox
Flight controls	Aileron Airbrake Artificial feel Autopilot Canard Centre stick Deceleron Dive brake Dual control Electro-hydraulic actuator Elevator Elevon Flaperon Flight control modes Fly-by-wire Gust lock HOTAS Rudder Rudder pedals Servo tab Side-stick Spoiler Spoileron Stabilator Stick pusher Stick shaker Trim tab Wing warping Yaw damper Yoke
Aerodynamic and high-lift devices	Active Aeroelastic Wing Adaptive compliant wing Anti-shock body Blown flap Channel wing Dog-tooth Drag-reducing aerospike Flap Gouge flap Gurney flap Krueger flap Leading-edge cuff Leading-edge droop flap LEX Slats Slot Stall strips Strake Variable-sweep wing Vortex generator Vortilon Wing fence Winglet
Avionic and flight instrument systems	ACAS Air data boom Air data computer Aircraft periscope Airspeed indicator Altimeter Annunciator panel Astrodome Attitude indicator Compass Course deviation indicator EFIS EICAS Flight management system Glass cockpit GPS Head-up display Heading indicator Horizontal situation indicator INS ISIS Multi-function display Pitot–static system Radar altimeter TCAS Transponder Turn and slip indicator Variometer Yaw string
Propulsion controls, devices and fuel systems	Autothrottle Drop tank FADEC Fuel tank Gascolator Inlet cone Intake ramp NACA cowling NACA duct Self-sealing fuel tank Splitter plate Throttle Thrust lever Thrust reversal Townend ring War emergency power Wet wing
Landing and arresting gear	Aircraft tire Arrestor hook Autobrake Conventional landing gear Drogue parachute Landing gear Landing gear extender Oleo strut Tricycle landing gear Tundra tire
Escape systems	Ejection seat Escape crew capsule
Other systems	Aircraft lavatory Auxiliary power unit Bleed air system Deicing boot Emergency oxygen system Environmental control system Flight recorder Hydraulic system Ice protection system In-flight entertainment system Landing lights Navigation light Passenger service unit Ram air turbine

Type of ribs

See also

References